Six models for large feed up to 1,300 mm and capacities up to 950 t/h.
Figures for the TI 1111P. Capacities are indicative and depend on feed material, gradation, moisture, hardness and setting. Tell us your application and we will confirm the figure for it.
The primary HSI breaks large feed with high-speed impact, achieving a high reduction ratio in a single stage. A heavy rotor and reinforced impact aprons deliver consistent impact energy and a controlled output size.
Six models cover capacities from 150 to 950 t/h for quarrying, mining and recycling, including concrete and asphalt aggregate.
Where a jaw crusher squeezes rock between two surfaces, the impactor strikes it at speed. Material breaks along its natural fracture lines and is thrown against adjustable impact aprons, giving a cubical product suited to concrete and asphalt aggregate.
Breaks material along natural fracture lines for a high reduction ratio and cubical shape.
C-shaped rotor ledges on a lift-out clamping system make blow-bar maintenance faster and safer.
Set the product size without manual work and adapt quickly to variable feed.
| Model | TI 1111P | TI 1012P | TI 1114P | TI 1313P | TI 1515P | TI 1620P |
|---|---|---|---|---|---|---|
| Feed opening | 1,140 × 950 mm | 1,140 × 840 mm | 1,410 × 950 mm | 1,340 × 1,000 mm | 1,540 × 920 mm | 2,040 × 1,400 mm |
| Maximum feed size | 600 mm | 600 mm | 600 mm | 900 mm | 850 mm | 1,300 mm |
| Capacity | 150–200 t/h | 150–200 t/h | 250–350 t/h | 300–500 t/h | 400–600 t/h | 600–950 t/h |
| Rotor diameter | 1,100 mm | 1,100 mm | 1,100 mm | 1,300 mm | 1,500 mm | 1,600 mm |
| Rotor width | 1,100 mm | 1,100 mm | 1,400 mm | 1,300 mm | 1,500 mm | 2,000 mm |
| Power | 160 kW | 160 kW | 200 kW | 250 kW | 315 kW | 2 × 250 kW |
| Weight | 15,100 kg | 13,150 kg | 16,800 kg | 22,400 kg | 26,800 kg | 40,500 kg |
Capacities are indicative and depend on feed material, gradation, moisture, hardness and setting. Tell us your application and we will confirm the figure for it.
Fixed-shaft cone crusher with a steep crushing angle for fine, even product.
Floating-shaft cone crusher for secondary and tertiary crushing.
Heavy-duty cone crusher with multi-actuator hydraulics for large-scale hard rock.
