Six models, up to a 356 mm feed opening, for demanding secondary and tertiary work.
Figures for the CM 100. Capacities are indicative and depend on feed material, gradation, moisture, hardness and setting. Tell us your application and we will confirm the figure for it.
The CM Series is a heavy-duty cone crusher for large-scale mining and hard-rock aggregate production. Multi-actuator hydraulics hold a constant crushing force and give precise control of the closed-side setting.
Six models cover capacities from 45 to 1,200 t/h. The CSS can be adjusted while the crusher runs, and hydraulic bowl rotation shortens liner changes.
A fixed main shaft works with multiple hydraulic actuators to keep crushing force constant. A bolted mainframe and hydraulic clamping keep the chamber stable for efficient reduction, while a hydraulic motor rotates the bowl to set the CSS.
Cylinders clamp the bowl and clear the chamber quickly to release tramp iron or prepare for a liner change.
A hydraulic motor rotates the bowl to change the CSS without stopping, and resets it after a tramp event.
Bowl and mantle liners are adjusted or removed hydraulically, which is quicker and safer.
Keep dust and moisture out of the bearing assembly to extend bearing life.
| Model | CM 100 | CM 200 | CM 300 | CM 400 | CM 500 | CM 800 |
|---|---|---|---|---|---|---|
| Feed opening | 150 mm | 185 mm | 241 mm | 304 mm | 351 mm | 356 mm |
| Feed size | 120 mm | 148 mm | 193 mm | 243 mm | 281 mm | 285 mm |
| Capacity | 45–140 t/h | 90–250 t/h | 150–440 t/h | 140–630 t/h | 175–790 t/h | 260–1,200 t/h |
| CSS range | 6–32 mm | 10–38 mm | 10–45 mm | 10–51 mm | 10–51 mm | 10–51 mm |
| Motor power | 90 kW | 132 kW | 200 kW | 315 kW | 355 kW | 600 kW |
| Weight | 5,400 kg | 10,400 kg | 15,810 kg | 23,000 kg | 33,150 kg | 68,650 kg |
Capacities are indicative and depend on feed material, gradation, moisture, hardness and setting. Tell us your application and we will confirm the figure for it.
Values in t/h. A dash means the model does not operate at that setting.
| CSS | CM 100 | CM 200 | CM 300 | CM 400 | CM 500 | CM 800 |
|---|---|---|---|---|---|---|
| 6 mm | 45–55 | — | — | — | — | — |
| 8 mm | 50–60 | — | — | — | — | — |
| 10 mm | 55–70 | 90–120 | 115–140 | 140–175 | 175–220 | 260–335 |
| 13 mm | 60–80 | 120–150 | 150–185 | 185–230 | 230–290 | 325–425 |
| 16 mm | 70–90 | 140–180 | 140–180 | 225–280 | 280–350 | 385–500 |
| 19 mm | 75–95 | 150–190 | 200–240 | 255–320 | 320–400 | 435–545 |
| 22 mm | 80–100 | 160–200 | 220–260 | 275–345 | 345–430 | 470–600 |
| 25 mm | 85–110 | 170–220 | 230–280 | 295–370 | 365–455 | 495–730 |
| 32 mm | 100–140 | 190–235 | 250–320 | 325–430 | 405–535 | 545–800 |
| 38 mm | — | 210–250 | 300–380 | 360–490 | 445–605 | 600–950 |
Used in:
High-pressure grinding roll crusher for manufactured sand and fine aggregate.
Vertical shaft impactor for shaped aggregate and manufactured sand.
Heavy-duty impactor for primary crushing of large feed with a high reduction ratio.
